
SECO-LARM DP-236Q Wireless Video Door Phone System, Wide 3-3/8" Monitor Screen for Enhanced Viewing, Adjustable Lens for a Wide Variety of Viewing Angles, Camera's Built-in PIR Sensor
Introducing the ENFORCER Wireless Video Door Phone, the handheld home entry solution. Observe visitors on the large 3-3/8" screen as they arrive, communicate with them, take photos for later viewing, and unlock a gate to grant entry - all from the wireless monitor. Use up to three monitors for viewing anywhere in the home.
Key Features- Wide 3-3/8" monitor screen for enhanced viewing
- Connect up to two additional monitors (sold separately)
- Includes a kickstand and charging base for the monitor
- 9~16 VAC/VDC Operation - connects to most doorbell circuits
- Adjustable lens for a wide variety of viewing angles
- Up to 100 images can be stored in memory
- Camera has built-in LEDs for nighttime operation
- Camera is IP55 rated for outdoor use
- Four programmable doorbell tones
- Type: Color Camera
- Chip: CMOS
- Resolution: 480 TV lines
- Lens: 2mm
- Viewing Angle: 170º
- Operating Voltage: 9~16 VAC/5~16 VDC
- Relock Delay: 1~6 s
- Relay Output: 3A@250VAC/30VDC max.
- Current Draw: Active 250mA@4.2VDC, Standby 3mA@4.2VDC
- Battery Life: Active 4.4 Hours, Standby 366 Hours
- PIR Detection Range: 9'
- PIR Detection Angle: 138º
- Dimensions: 5-11/16"x3-1/8"x1-15/16"
- Weight: 122g
- Display: 3-3/8" TFT
- Operating Voltage: 5VDC (adapter), 3.7VDC (Battery)
- Current Draw: Active 250mA@4.2VDC, Standby 5mA@4.2VDC
- Battery Life: Active 4.4 Hours, Standby 220 Hours
- Operating Frequency: 2410.875~2471.625MHz
- RF Power: 120mW
- Dimensions: 5"x3-3/8"x7/8"
- Weight: 110g
- Talk with visitors and unlock doors or gates via the monitor
- Handheld monitor's rechargeable battery allows convenient communication with visitors while moving around the premises
- Egress input allows the door phone to be connected with a Request-to-Exit Plate or other egress device
- Camera's built-in PIR sensor takes photos of approaching visitors
- Tamper switch triggers alarm if camera is removed from its base